How To Use Floor Scrubber

There are some basic things you have to take care of before you can use your floor scrubber, no matter what kind of work you are doing. It is the same thing like driving your car, you check for the oil, gas, check the rear mirror and put your seat belt on. And since a scrubber is machine too, there are some steps you will have to learn in order to use it properly.

First thing to do is to unplug the battery charger and set the cord on its place. You don't want it to fall down and make you a problem. After you take care of this, you have to install pad drive and install a pad itself. You can also use a brush, depending on what kind of work you are doing. This also means that you have to check for the recovery tank. Make sure it is empty so you do not have to stop in the middle of the work for no good reason.



It is always a good idea to check is the vacuum shut-off operational. Make sure there is nothing in the way and that you are getting the maximum out of a floor scrubber. Then check the solution tank. If there isn't enough of it, fill it up with the solution you bought. Now you are ready to start the machine.

You should select the appropriate water and pad pressure. This depends on what kind of surface you are working on. The manual should have all the setting already explained, so you have to check it for the details. After you've done that, you can start the brushes and vacuum. Now you only have to lower the squeegee and start scrubbing.

When your floor scrubber fills up the recovery tank, you should turn off the machine completely, but before you have to shut off the vacuum, brushes and water. You can now lift the squeegee and shut the whole machine off. Empty the recovery tank into drain, then you can start using the machine again. You have to start from the beginning, completing all the steps in the exact order.

Using Scrubbers For Polished Concrete Floor Maintenance

Polished concrete floor maintenance is becoming very popular choice for commercial businesses and homeowners in the past few years. It is a flooring choice that is not just stunning to look at, it is the most durable type of floor you can have. And this is exactly why it has such a popularity and why so many people choose to have it over other types of flooring.

These polished concrete floors are finished and are not impervious to scratches. This is why they have to be treated with some kind of polish from time to time. Otherwise, they may become stained and lose their appearance.

It is important to remember that these floors have to be cleaned regularly and that walk off mats are highly recommended. They will prolong the life of the surface and will keep the sharp sand from the flooring. We all know how sand can be dangerous and what kind of damage it can make.

You should use a micro-fiber mop to clean the polished floors. But the best solution is a floor scrubber. It has the ability to replace the damp mop that uses neutral cleaner. And it is also a good solution to save time. Usually, these are large surfaces and it would take quite a while to clean them. That's why a floor scrubber can be a great help here. It can be used in different tasks, and one of them is polishing concrete floors. Since these machines are fairly easy to use, many homeowners have them. And if you have a large area to clean and polish, floor scrubber is a must.

You will be able to find buffing pads with diamonds impregnated. It is exactly what gives the shine to the floor and the work you need to do is quite small. And if you are doing the cleaning, you will only need white pads for your floor buffer.

The spills and stains you have to be careful about are red wine, oil and similar. They are able to leave a darkened and discolored area because they attach to the porous concrete. Once they are in, it is hard to get them out, and they are very visible. You can clean them by being fast, but if you are too late, the surface may never be the same again.

Reactive stains will etch the top layer of the concrete floors and you will have to deal with the damage. This is why you should clean the surface regularly, or even better, get it sealed. A floor scrubber will be a helpful tool in both activities.

When you add topical polisher, you get some protection to the floor. You can easily maintain them and put some high gloss too. If your flooring gets some serious traffic, use diamond impregnated pads or even resin bond diamonds. They will surely bring back the gloss to your floor.